Soil Data Explorer - NEZ PERCE

Official Series Description

Lab Data Summary

Aggregate lab data for the NEZ PERCE soil series. This aggregation is based on all pedons with a current taxon name of NEZ PERCE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to NEZ PERCE were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
9	86P0245	85ID061065	Nez Perce	5	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	46.2677765,-116.4300003
9	85P0984	85ID069006	Nez Perce	7	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	46.2486115,-116.8611145
9	86P0876	86ID061001	Nez Perce	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	46.2333336,-116.3938904

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the NEZ PERCE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the NEZ PERCE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the NEZ PERCE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the NEZ PERCE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with NEZ PERCE share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the NEZ PERCE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the NEZ PERCE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with NEZ PERCE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

1. ID-2010-08-30-11 | Lewis and Nez Perce Counties - 2004

   Typical pattern of the soils in general soil map unit 4 (Soil Survey of Lewis and Nez Perce Counties, Idaho; 2004).

2. ID-2010-08-30-17 | Lewis and Nez Perce Counties - 2004

   Typical pattern of the soils in Uhlorn-Nez Perce complex, 2 to 10 percent slopes (Soil Survey of Lewis and Nez Perce Counties, Idaho; 2004).

Map Units

Map units containing NEZ PERCE as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Uhlorn-Nez Perce complex, 2 to 10 percent slopes	142	36355	79610	2nv2	id611	1994	1:24000
Nez Perce silty clay loam, 2 to 10 percent slopes	97	12691	79714	2nyf	id611	1994	1:24000
Mohler-Nez Perce-Uhlorn complex, 2 to 10 percent slopes	87	10164	79703	2ny2	id611	1994	1:24000
Uhlorn-Nez Perce complex, 10 to 20 percent slopes	143	7943	79611	2nv3	id611	1994	1:24000
Nez Perce-Uhlorn complex, 8 to 15 percent slopes	99	3591	79716	2nyh	id611	1994	1:24000
Nez Perce silty clay loam, dry, 1 to 4 percent slopes	98	1606	79715	2nyg	id611	1994	1:24000
Nez Perce silt loam, 7 to 12 percent slopes	84	67861	154062	559r	id617	1976	1:24000
Nez Perce silt loam, 2 to 7 percent slopes	83	16395	154061	559q	id617	1976	1:24000
Nez Perce silt loam, 12 to 25 percent slopes	85	3256	154063	559s	id617	1976	1:24000
Nez Perce ashy silt loam, 0 to 8 percent slopes	6080	1549	681399	qw1m	wa063	2012	1:24000

Map of Series Extent

Approximate geographic distribution of the NEZ PERCE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).